High Speed Data Acquisition, Mass Storage, Fast Playback | Expansion Units | FPGA Platforms and Servers

This 1U rackmount server is the most economical of the BittWare TeraBox series, accommodating a single FPGA board.  All BittWare PCIe cards are compatible: Xilinx UltraScale+, Intel Arria 10, and Intel Stratix 10.

This 1U rackmount server from the BittWare TeraBox series accomodates a single BittWare XUPP3R board with a Xilinx UltraScale+ Virtex VU9P FPGA.

The TeraBox 1400B in a custom chassis by BittWare gives the highest density of compute and network acceleration in a 1U rack mount form factor.

BittWare’s FPGA boards are equipped with a Board Management Controller (BMC), which accepts IPMI 2.0 commands. BittWare’s BittWorks II Toolkit is used to program the FPGA over USB, monitor board power and temperature, and reprogram the onboard clocks.

The BittWare TeraBox 2000D is a 2U FPGA server based on the Dell PowerEdge R740 chassis. This server includes two Intel Xeon Scalable CPUs and high PCIe slot density. Dell ProSupport is available.

The TeraBox 4000S in a SuperMicro 4029GP-TRT chassis gives high density of compute and network acceleration in a 4U rack mount form factor. This server delivers the power of eight BittWare double width FPGA cards, or 16 low profile boards.

The BittWare TeraBox 5000TT is a 5U serial expansion chassis for 8x BittWare double-width FPGA PCIe cards that can be connected to a BittWare FPGA server to connect multiple FPGA boards to the same host.

The e4 chassis by LDA Technologies is a unique solution that transforms any FPGA-based PCIe card into a high-end networking device.

The EDT SNAP1 1U system captures real-time, raw bit data for storage and playback. OTU4 data of 128, 256, or 512 GB is saved on an internal solid state drive, or to external nonvolatile memory via USB or 1 GbE. 32 or 64 GB snapshot memory is available.

The EDT μWRAP 25G is a compact system with 12 to 24 TB of storage, and two optical interfaces for recording and playback. This is low SWaP (size, weight, and power) solution in a small, self-contained system. It operates with two real-time 12.5 Gbs data streams with framed data capture.

Bring your own M.2 NVMe solid state drives (SSD) and plug in to the EDT Mako carrier board to record up to 8 Terabytes of storage capacity. The board seats in a standard PCIe slot, and takes up to four ultra high speed NVMe RAID disk drives. 512 GB, 1 TB or 2 TB SSDs can be used, totaling 8 TB.

The EDT uWRAP VITA 49 is a compact, self-contained system for recording and playback of VITA 49 data streams. With 12 or 24 TB of data storage and one or two high speed optical interfaces, the uWRAP VITA 49 provides a reduced size, weight, and power (SWaP) VITA 49 record / playback solution.

The EDT WBX Recorder is a single channel RF digitizer and recording system with a 2.6 GHz input bandwidth and 12 TB of signal storage. The system has one RF input, a 10 MHz reference and 1 pps input or output, and a 10 GbE output port.