Menü


Logo – Sky Blue Microsystems GmbH

BittWare S4AM | Altera Stratix IV GX FPGA | 10GigE | VITA 57 FMC | AdvancedMC | Serial I/O-based Applications

Based on Altera’s Stratix IV GX FPGA, BittWare’s S4-AMC (S4AM) is a mid- or full-size, single wide AdvancedMC that can be attached to AdvancedTCA carriers or other cards equipped with AMC bays, and used in MicroTCA systems. The S4AM features a high-density, low-power Altera Stratix IV GX FPGA designed specifically for serial I/O-based applications, creating a completely flexible, reconfigurable AMC. Providing enhanced flexibility is the VITA 57-compliant FMC site, which features 8 SerDes, 80 LVDS pairs, and 6 clocks directly to the FPGA. The board also provides an IPMI system management interface, a configurable 15-port AMC SerDes interface supporting a variety of protocols, and a front panel 4x SerDes interface supporting CPRI and OBSAI. Additionally, the board features 10/100 Ethernet, Gigabit Ethernet, 2 banks of DDR3 SDRAM, 2 banks of QDRII+ SRAM, and Flash memory for booting the FPGAs and FINe.

The Altera Stratix IV GX was specifically designed for serial I/O-based applications requiring high-density, reconfigurable logic. The Stratix IV GX provides 27 full-duplex, multi-gigabit transceivers, 24 of which are high-performance supporting PCI Express (Rev 1.0/2.0), 10GigE, GigE, Serial RapidIO (Rev 1.0/2.0), and SerialLite II standards. It contains up to 530k equivalent LEs, over 20 Mbits of embedded memory, and 1,024 embedded 18×18 multipliers.

Features

Fat Pipes, Common Options, and I/O Interfaces

The Stratix IV GX FPGA interfaces to 3 ports (1, 2, & 3) in the AMC common options region, and 16 ports in the AMC fat pipes region (4 – 15, 17 – 20). These 19 ports provide a network data and control switch fabric interface on the AMC connector, with 12 supporting up to 6.25 GHz, 3 supporting up to 3.125 GHz, and the remaining 4 providing rear-panel GPIO. All AMC clocks are also connected to the Stratix IV GX. The front panel provides an additional 4 SerDes via an Infiniband-type connector, along with 10/100 Ethernet, 2 RS-232 ports, and a JTAG port for debug support.

BittWare’s FINe III Host/Control Bridge implements a complete control plane interface for the S4AM, facilitating separate control and data planes, and greatly simplifying the development of data plane I/O and processing. Extensive software support is provided via BittWare’s BittWorks Toolkit, which is tightly integrated with the FINe.

The FINe III provides GigE via the common options region, along with 10/100 Ethernet and an RS232 monitor port on the AMC front panel, and is connected to the FPGA via a local control bus.

VITA 57 FMC Site for Processing and IO Expansion

The S4AM features an FMC (FPGA Mezzanine Card) site, which provides 8 high-performance SerDes and 80 LVDS, along with clocks, I2C, JTAG, and reset connected to the Stratix IV. The site is based on the VITA 57 mezzanine standard for FPGA I/O, enabling designers to customize the S4AM to their individual needs with optional FMC I/O boards. A variety of I/O or processor FMCs are available integrated with the S4AM.

Development Tools

BittWare offers complete software support for the S43X with its BittWorks II software tools. The BittWorks II Toolkit is a collection of libraries and applications for BittWare’s Stratix IV and V FPGA-based boards. Designed to make developing and debugging the applications for BittWare’s boards easy and efficient, the Toolkit provides the glue between the host application and the hardware. The Toolkit supports 32-bit, and 64-bit Windows and Linux platforms.

BittWare S4AM accelerator diagram showing key hardware elements e.g. GigE, 15 channels SerDes, 32 LVDS pairs, 10/100 Ethernet, RS-232, JTAG, etc.
Hardware accelerator diagram: BittWare S4AM with VITA 57 FPGA Mezzanine Card module site.

Product Data

BittWare S43X is a single width AMC card with Altera Stratix IV GX FPGA supports PCI Express rev 1.0/2.0, 10 GigE, GigE, Serial RapidIO rev 1.0/2.0, and SerialLite II standards, as well as many others.
S43X is a mid-size or full-size AMC board with Altera Stratix IV GX.
FINe III Host/Control Bridge architecture scheme of BittWare S4AM showing key elements.
FINe III architecture overview: S4AM is equipped with FINe III Host/Control Bridge.
BittWorks II Toolkit include BwMonitor app provides a view into the board management capabilities like live board power and temperature display of BittWare hardware.
BwMonitor is a part of the BittWorks II Toolkit: provides live board power and temperature display of BittWare hardware.

For more information, please call +49 (0) 89 – 780297 0, or email us at info@skyblue.de, or fill out this form: